• GMP10K 48v single phase hybrid solar inverter 10kw off grid
  • GMP10K 48v single phase hybrid solar inverter 10kw pv 450v

GMP10K 48v single phase hybrid solar inverter 10kw pv 450v

Hybrid Off-grid Solar Inverter | 10KVA/10KW | 48VDC | 160A MPPT Charger | PV INPUT: 120VDC ~ 430VDC | Pure Sine Wave

SKU: GMP10K Category:

GRANKIA GMP10K 48v single phase hybrid solar inverter 10kw pv 450v offers a range of features and capabilities to support off-grid solar systems.

GMP Single Phase Hybrid Inverter 3000W - 10KW

GMP Single Phase Hybrid Inverter 3000W – 10KW

GMP10K hybrid solar inverter 10kw is designed to convert the DC electricity generated by solar panels into AC electricity that can be used in homes or businesses, while also managing the flow of electricity to and from a battery bank.

It can operate without a battery, using only solar power to meet the energy needs of the user. However, it can also be connected to a lithium iron phosphate (LiFePO4) battery to store excess energy generated by the solar panels for use later, when solar power is not available.

The use of a LiFePO4 battery provides a number of benefits, including high energy density, long lifespan, and improved safety compared to other types of batteries. With the ability to work both with and without a battery, a hybrid solar inverter 10kW can provide users with greater flexibility and control over their energy usage, while also helping to reduce their reliance on traditional grid power and promote sustainability.

GMP10K single phase hybrid solar inverter 10kw pv 450v

Hybrid Inverter 10KW Features

  • Pure sine wave inverter
  • Built-in 160A MPPT solar charge controller
  • Selectable input voltage range for home appliances and personal computers
  • Selectable charging current
  • High PV input voltage range(120Vdc-430Vdc)
  • Configurable AC/solar input priority via LCD setting
  • Compatible to mains voltage or generator power
  • Auto restart while AC is recovering
  • Overload and short circuit protection
  • Smart battery charger design for optimized battery performance and extend battery lifecycle
  • Cold start function
  • Surges to 2X continuous power for 5 seconds for motor loads
  • Wide utility input range (90V ac ~280Vac) for unreliable grid even in the most challenging environments
  • Can work without battery when there is sunshine or AC input

Off Grid Solar System Diagram

The following illustration shows basic application for this inverter/charger. It also includes following devices to have a complete running system:

– – Generator or Utility.

– – PV modules 

Consult with your system integrator for other possible system architectures depending on your requirements.

GMP Solar Inverter Hybrid Solar System

 

MPPT Solar Inverter Product View

GMP Solar Inverter Product Views

 

GMP Solar Inverter 10kVA Connection Terminal

 

1.LCD Display                                                               9. AC INPUT Terminal

2.Line Indicator                                                          10. RS232 Port

3. Inverter Indicator                                                   11. USB Port

4. Charger Indicator                                                   12. Power ON/OFF

5. Fault Indicator                                                        13. Parallel Communication Port(only for 5kVA)

6. Function Buttons                                                    14. Battery Connectors

7. AC INPUT Fuse (Dual)                                           17. #PV1 INPUT Connectors

8. AC OUTPUT Terminal                                           18. #PV2 INPUT Connectors

 

Solar Inverter 10KW Operation Mode

Run with battery bank connection

GMP Hybrid Inverter Operation With Battery

This inverter with battery bank connection mode allows the system to store excess energy produced by the solar panels during the day for use at night or during times of low solar irradiance. The battery bank also helps to regulate the voltage and frequency of the power output from the inverter, which is important for ensuring the safe and efficient operation of electrical equipment.

Run without battery bank connection

GMP Hybrid Inverter Operation Without Battery

This solar inverter is typically used in applications where the energy demands are low, or where the solar panels are able to consistently produce enough power to meet the energy needs of the home or building.

It’s important to note that while off-grid solar inverters that operate without batteries can be useful in certain situations, they are not typically recommended for long-term or high-energy applications, as they may not provide the same level of reliability or consistency as an off-grid system with batteries.

The Articles You may Like

    Request Product Price


    * Required

    Model GMP10K
    Phase 1-phase in / 1-phase out
    Rated Power 10KVA/10KW
    Parallel Function Yes, Max. 9 Units
    Dimension DxWxH (mm) 110x400x680
    Net Weight (kgs) 15.8
    AC INPUT
    Rated Voltage 208VAC/220VAC/230VAC/240VAC
    Voltage Range 90VAC – 280VAC ± 2%
    Nominal Frequency 50Hz/60Hz (Auto detection)
    Frequency Range 40Hz – 70Hz
    AC OUTPUT
    Rated Voltage 208VAC/220VAC/230VAC/240VAC(settable) ± 5%
    Frequency 50Hz/60Hz ± 1%
    Frequency Range 50Hz: 43.5Hz – 56.5Hz (UPS) / 40Hz – 70Hz (Appliances)
    60Hz: 53.5Hz – 66.5Hz (UPS) / 40Hz – 70Hz (Appliances)
    Surge Power 20KVA
    Efficiency Line Mode > 99.5%
    Battery Mode 91.5%
    Overload Protection 1 min@102% – 110%load; 10s@110%~130%load;
    3s@130%-150%load; 200ms @>150%load
    Transfer Time 10ms (For Personal Computers); 10ms (For Home Appliances)
    Waveform Pure sine wave
    BATTERY
    Battery Voltage 48VDC
    Floating Charge Voltage 54VDC
    Overcharge Protection 62VDC
    SOLAR CHARGER & AC CHARGER
    Maximum PV Array Power 11000W (5500W*2)
    MPPT Range @ Operating Voltage 120VDC – 430VDC
    Maximum PV Array Open Circuit Voltage 450VDC
    Maximum Solar Charge Current 160A
    Maximum AC Charge Current 2A – 160A (Settable)
    Maximum Charge Current 160A
    Standby Power Consumption <60W
    SYSTEM
    Display LCD + LED
    Cooling Forced air cooling
    Communication Interface USB, RS232, CAN
    OPERATING ENVIRONMENT
    Protection Level IP21
    Humidity 5% to 95% Relative Humidity(Non-condensing)
    Altitude < 3000m
    Operating Temperature -15°C to 55°C
    Storage Temperature -25°C to 60°C