GMS MAX 11000 best 48V dc to ac off grid solar inverter 11kw

Hybrid Off-grid Solar Inverter | 11000VA/11000W | 48VDC | 150A MPPT Charger | PV INPUT: 90VDC ~ 450VDC | WIFI Module

SKU: GMS MAX 11000 Category:

GRANKIA GMS MAX 11000 best 48V dc to ac off grid solar inverter 11kw is a powerful renewable energy solution that can significantly reduce your reliance on grid electricity.

GRANKIA GMS MAX is a new generation inverter technology that comes with an inbuilt Wi-Fi monitoring device and company fitted battery wire, AC DC Distribution Box. This off grid solar inverter comes with elegant RGB lights on the front, different color to present output source from PV, Grid or battery and battery charge/discharge status.

This 11000W solar inverter 48v requires a battery bank to store excess energy generated during the day. So that it can be used during times of low sunlight or at night. It is including the amount of energy storage required, the maximum power output, and the expected usage patterns.

The power rating of the inverter should match or exceed the maximum power output of your solar panel array or battery bank. For an 11kW solar panel system, you need an inverter with a power output of at least 11kW.

GMS MAX 11000 best 48V dc to ac off grid solar inverter 11kw

This inverter is intelligent and programmable for maximising overall system efficiency and savings, also all-in-one inverter solution for grid-connected solar-plus-storage systems.

11000W Solar Inverter 48V Features

  • Customizable status LED bar with RGB lights
  • Removable LCD control module with multiple communications interface for BMS(RS485, CAN-BUS, RS232)
  • Pure Sine Wave Output
  • Integrated 80A MPPT solar charge controller
  • Built-in WIFI module for mobile monitoring (Android App is available)
  • Built-in anti-dusk kit
  • Can run without battery bank connection
  • Supply load from Grid or PV, even battery is not available
  • Configurable AC/PV output usage timer and prioritization
  • Selectable high power charging current
  • Selectable input voltage range for home appliances and personal computers
  • Compatible to Utility Mains or generator input
  • Auto restart while AC is recovering
  • Suitable for lead acid battery, gel battery, lithium battery(with BMS communication)
  • Cold start function

GMS MAX solar inverter features








Hybrid Solar System Diagram

GMS MAX solar inverter system connection

Depending on different power situations, this hybrid solar power inverter is designed to generate continuous power from PV solar modules, battery, and the utility. When MPPT input voltage of pv modules is within acceptable range, this inverter is able to generate power to feed the grid(utility) and charge the battery. Galvanic isolation designed between PV/DC and AC output, so that the users could connect any type of PV array to this hybrid inverter.

Solar Inverter Overview

GMS MAX solar inverter front panel

GMS MAX solar inverter terminal details

1. LCD display                                  12. Current sharing port
2. Status indicator                            13. Parallel communication port
3. Charging indicator                       14. Dry contact
4. Fault indicator                              15. USB port as USB communication port and USB function port
5. Function buttons                          16. BMS communication port: CAN, RS-485 or RS-232
6. Power on/off switch                     17. Output source indicators
7. AC input connectors                    18. RS-232 communication port
8. AC output connectors                  19. RGB LED bar
9. PV connectors                              20. 12V DC output connectors (option)
10. Battery connectors                     21. Power switch for DC output (option)
11. Remote LCD module communication Port

Remote Display Panel Installation

The LCD display module can be removable and installed in a remote location with an optional communication cable.

Step #1: Remove the screw on the bottom of LCD module and pull down the module from the case. Detach the cable from the original communication interface. Be sure to replace the retention plate back to the inverter.

GMS MAX solar inverter remote panel remove

Step #2: Prepare your mounting holes in the marked locations as shown in the illustration below. The LCD module can be securely mounted to your desired location.

GMS MAX solar inverter remote panel mounting

Step #3: After LCD module is installed, connect LCD module to the inverter with an optional RJ45 communication cable.


GMS MAX solar inverter communication with PC


Solar Power Inverter in Parallel

#1. Single Phase in Parallel

GMS MAX solar inverter 6 units single phase in parallel connection

#2. Three Phase in Parallel

GMS MAX solar inverter 6 units three phase in parallel connection


The Articles You may Like

Model GMS MAX 11000
PHASE 1-phase in/1-phase out
RATED POWER 11000VA/11000W
Dimension DxWxH (mm) 147.4×432.5×553.6
Net Weight (kgs) 18.4
Voltage 220VAC/ 230VAC
Selectable Voltage Range 170-280 VAC (For Personal Computers)
90-280 VAC (For Home Appliances)
Frequency Range 50 Hz/60 Hz (Auto sensing)
AC Voltage Regulation
(Batt. Mode)
220VAC / 230VAC ± 5%
Surge Power 15000VA
Efficiency (Peak) 93%
Transfer Time 15 ms (For Personal Computers); 20 ms (For Home Appliances)
Waveform Pure sine wave
Battery Voltage 48 VDC
Floating Charge Voltage 54 VDC
Overcharge Protection 66 VDC
Maximum PV Array Power 11000W(2*5500W)
MPPT Range @ Operating Voltage 90VDC ~ 450VDC
Maximum PV Array Open Circuit Voltage 500VDC
Maximum Solar Charge Current 150A
Maximum AC Charge Current 150A
Maximum Charge Current 150A
Communication Interface USB/RS232/RS485/WiFi/Dry contact
Humidity 5% to 95% Relative Humidity(Non-condensing)
Operating Temperature -10°C to 50°C
Storage Temperature -15°C to 60°C

* Product specifications are subject to change without further notice.