All in One ESS | Power: 8.2kW | Energy: 16.07kWh | Indoor | Output Voltage: 220V / 230V
Grid instability is no longer a rare inconvenience — it’s a recurring reality for millions of households. Rolling blackouts, storm-related outages, and rising time-of-use electricity rates have pushed homeowners to search for a dependable solar battery system that does more than just store a little backup energy. They need a system that can run an entire home: refrigeration, HVAC, water pumps, and home offices, without flickering, without delay, and without a diesel generator parked in the driveway.
The solution is an intelligent solar battery system that combines solar generation, battery storage, and energy management into one integrated platform.
GRANKIA AIO-8K16LV 8kW off grid solar battery system is engineered to solve these problems by storing solar energy during the day and delivering reliable electricity whenever homeowners need it.
The AIO-8K16LV solar battery system is a complete residential energy storage solution that integrates:
Unlike conventional solar installations requiring separate inverters, batteries, and controllers, the all-in-one design simplifies installation, reduces wiring complexity, and improves system reliability.
This home solar battery backup system with 8kW inverter is optimized for homeowners who require uninterrupted power, energy independence, and long-term electricity savings.

A home backup solar battery system must handle daily variability: morning sun charging patterns, evening peak loads, and sudden changes like the microwave or HVAC cycling. AIO-8K16LV emphasizes an off-grid strategy where solar energy and battery energy act as a coordinated supply chain.
Key benefits you should expect from a properly engineered solar battery system like AIO-8K16LV include:

The integrated 8.2kW inverter provides sufficient power capacity for most residential applications, including:
With a 16.4kW surge power capability, the system can handle high starting currents from motor-driven appliances.
The pure sine wave output ensures stable and clean electricity comparable to grid power, protecting sensitive electronic equipment.
Benefits:
The AIO-8K16LV solar battery system uses advanced Lithium Iron Phosphate (LiFePO₄) battery technology, known for safety, durability, and long service life.
| Battery Parameter | Value |
| Battery Chemistry | LiFePO₄ |
| Nominal Voltage | 51.2VDC |
| Rated Capacity | 314Ah |
| Energy Capacity | 16.07kWh |
| Cycle Life | ≥8000 Cycles @ 80% DoD |
| Battery Configuration | 16S1P |
| Max. Discharge Power | 7200W |
Compared with traditional lead-acid batteries, LiFePO₄ technology offers:
This makes the AIO-8K16LV an ideal 16kWh lithium battery solar storage system for home backup.
To maximize solar energy harvesting, the system supports up to: 13kW PV Array Power (2 × 6.5kW)
The dual MPPT architecture allows homeowners to install solar panels in different orientations, improving energy production throughout the day.
| Solar Input Parameter | Specification |
| Maximum PV Power | 13kW (6.5kW * 2) |
| Solar Charger Type | MPPT |
| MPPT Trackers | 2 |
| Maximum PV Voltage | 500VDC |
| MPPT Operating Range | 60VDC – 450VDC |
| Maximum Solar Charging Current | 140A |
Advantages:
Because the AIO-8K16LV draws from stored solar energy and grid charging rather than combustion fuel, it delivers pure sine wave output — the same clean waveform utilities provide — without noise, exhaust, or refueling. This makes it a genuinely off-grid-capable solar battery system, not just a supplemental backup box.
The built-in energy management system automatically controls:
Users can monitor system operation through:
The intelligent monitoring platform provides real-time information including:
This enables homeowners to optimize electricity usage and reduce grid dependency.
The system’s 10ms transfer time for PC/electronic loads and 20ms for home appliances keeps sensitive electronics running through a grid failure without a noticeable interruption — a critical feature for home offices, medical devices, and networking equipment.
| Specification | AIO-6K16LV |
| Rated Power | 8.2kW |
| Battery Capacity | 16kWh |
| Battery Type | LiFePO₄ |
| Rated Battery Voltage | 51.2V |
| Battery Capacity | 314Ah |
| Max PV Input | 13.0kW (6.5kW *2 ) |
| MPPT Voltage Range | 60–450V |
| Peak Surge Power | 16.4kW |
| Solar Charge Current | 140A |
| AC Charge Current | 120A |
| Max Charge Current | 140A |
| Communication | RS232, CAN, Bluetooth, WiFi |
| Monitoring | Mobile App & Web Portal |
| Installation | Floor Mounted |
| Cooling | Intelligent Forced-Air Cooling |
| Dimensions | 700 × 310 × 1100 mm |
| Weight | 130 kg |
The AIO-6K16LV incorporates multiple layers of protection to ensure safe and reliable operation.
| Protection Category | Functions |
| PV Protection | Reverse polarity, overvoltage, overcurrent |
| Battery Protection | Overcharge, over-discharge, overcurrent, over-temperature, undervoltage, short circuit |
| AC Protection | Overvoltage, undervoltage, overload, short circuit |
| System Protection | Intelligent BMS management, lithium battery activation, automatic fault detection |
Use the solar battery system to keep essential circuits running—lighting, Wi‑Fi/router, refrigeration, and mobile charging—so your house remains livable during outages.
Many homeowners don’t need every outlet simultaneously, but they want stability for key loads. The 8kW class capacity makes it practical for essential power planning with a solar battery system that can support more than “minimum backup.”
In climates where temperature swings matter, families often allocate part of the solar battery system output to heating/cooling control loads (or staged operation) to reduce discomfort during grid interruptions.
A common residential use case for any solar battery backup system is maintaining cold-chain continuity—freezers, refrigerators, and medical-cold storage (where applicable) during storms or grid failures.
Off-grid and backup scenarios often include well pumps, water circulation, or sump pumps. AIO-8K16LV is typically considered when homeowners want backup capability that supports water reliability.
For cabins, rural residences, and vacation homes, a solar battery system provides dependable backup without depending on frequent grid availability—supporting day-to-night operation powered by stored solar energy.

Beyond blackouts, some households use a solar battery system to smooth out intermittent grid behavior and reduce reliance during higher-cost periods, shifting usable power to when solar and battery output are most favorable.
Compared with traditional solar + battery solutions, the AIO-8K16LV provides:
| Traditional System | AIO-8K16LV Solution |
| Separate inverter and battery installation | Integrated all-in-one design |
| Complex wiring | Simplified installation |
| Limited battery lifespan | 8000+ cycle LiFePO₄ battery |
| Manual monitoring | Smart APP/Web monitoring |
| Slow backup switching | 10ms fast transfer |
| Model | AIO-8K16LV |
| Phase | Single-Phase Input / Single-Phase Output |
| Maximum PV Array Power | 13.0kW (6.5 kW * 2) |
| Rated Power | 8.2 kW |
| Nominal Energy Capacity | 16kWh |
| Dimension DxWxH (mm) | 700x310x1100 |
| Net Weight (kg) | 130.00 |
| PV INPUT | |
| Solar Charger Type | MPPT |
| Max. PV Array Open Circuit Voltage | 500VDC |
| MPPT Range @ Operating Voltage | 60VDC – 450VDC |
| No. of MPPT Trackers/Current | 2/27A |
| AC INPUT | |
| Rated Voltage | 220VAC/230VAC/240VAC |
| Voltage Range | 90VAC – 280VAC or 170VAC – 280VAC |
| Frequency | 50Hz / 60Hz (Auto Detection) |
| AC OUTPUT | |
| Rated Voltage | 220VAC/230VAC/240VAC ± 3% |
| Rated Output Current | 37.5A |
| Max. Output Current | 71.3A |
| Frequency | 50Hz / 60Hz ± 0.3Hz |
| Surge Power | 16.4KW |
| Peak Efficiency (PV to INV) | > 96% |
| Peak Efficiency (Battery to INV) | > 93% |
| Power Factor | 0.8 Leading ~ 0.8 Lagging |
| Transfer Time | 10 ms (PC Loads), 20 ms (Home Appliances) |
| Waveform | Pure sine wave |
| Overload Capacity | 60s@102%-110% load, 10s@110%-140% load, 5s@>140% load |
| BATTERY | |
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Battery Voltage | 51.2VDC |
| Cell Configuration | 16S1P x 1 |
| Rated Capacity | 314AH |
| Cycle Life | ≥8000 Cycles @ 80% DoD |
| Battery Voltage Range | 40 – 58.4VDC |
| Discharge Cut-off Voltage | 43.2VDC |
| Charge Cut-off Voltage | 58.4VDC |
| Max. Discharge Power | 7200W |
| CHARGER | |
| Maximum Solar Charge Current | 140A |
| Maximum AC Charge Current | 120A |
| Maximum Charge Current | 140A |
| PROTECTION | |
| PV Input Protection | Reverse Polarity, Overvoltage, Overcurrent Protection |
| AC Input/Output Protection | Overcurrent, Overvoltage, Undervoltage, Short Circuit Protection |
| Battery Protection | Overcharge, Over-discharge, Undervoltage, Overcurrent, Over-temperature, Short Circuit Protection |
| SYSTEM | |
| Display | LCD + LED Indicator |
| Cooling | Intelligent Forced-Air Cooling |
| Installation Type | Floor-Mounted |
| Enclosure Protection Rating | IP20 (Indoor Installation) |
| Communication Interface | RS232(Solar Inverter), CAN(BMS),Bluetooth, WiFi |
| Remote Monitoring Platform | App/Web Portal |
| Lithium Battery Activation | Supported (via PV or Utility Power) |
| OPERATING ENVIRONMENT | |
| Humidity | 10% to 95% Relative Humidity(Non-condensing) |
| Altitude | <1000 m (Derating Above 1000 m) |
| Operating Temperature | Charge: 0°C to 50°C, Discharge: -20°C to 50°C |
| Storage Temperature | -15°C to 50°C |