GRANKIA HC1040EH48L inverter is a 4kW solar power inverter unit. It has an IP65 rated casing, dual MPPT solar power inverter tracking channels for 8kW PV oversized input, and 48V battery connection. It operates at 97.6% efficiency with a ≤10ms UPS transfer time. This inverter provides solar power inverter energy management under extreme outdoor conditions.
The HC1040EH48L 4kW IP65 solar power inverter is a hybrid energy conversion solution for modern residential solar systems. It combines solar energy harvesting, battery charging, grid interaction, and backup power management in one wall-mounted unit.
With a recommended maximum PV input power of 8kW (4kW + 4kW), dual MPPT tracking technology, and compatibility with 48V lead-acid, gel, and lithium batteries, it increases solar utilization and supplies household electricity.
The IP65 solar power inverter supports 220V/230V/240V single-phase applications. It is suitable for homes, villas, remote houses, and small off-grid energy systems.
Reliable Solar Energy Management for Homes
Residential energy users require more than basic solar conversion.
They need:
- Higher solar self-consumption
- Stable backup power during grid outages
- Battery storage flexibility
- Outdoor installation capability
- Intelligent energy monitoring
The HC1040EH48L addresses these requirements through an integrated hybrid architecture.
It works as a:
- Solar inverter
- Battery charger
- Backup power controller
- Energy management device
This makes it an ideal 48V hybrid solar inverter for home energy storage applications.
Technical Specifications
| Model | HC1040EH48L |
| Rated Output Power | 4kW |
| PV Input Power | Max. 8kW (4kW + 4kW) |
| Battery Voltage | 48VDC |
| Battery Voltage Range | 40-60VDC |
| Phase Configuration | Single Phase Input / Single Phase Output |
| PV Maximum Voltage | 500VDC |
| MPPT Voltage Range | 120VDC-425VDC |
| MPPT Trackers | 2 MPPT |
| Maximum Efficiency | 97.60% |
| MPPT Efficiency | >99% |
| Protection Rating | IP65 |
| Installation | Wall-mounted |
| Weight | 14kg |
| Warranty | 5 Years |
Key Features
Solar Input Capability with Dual MPPT Technology
Maximized Solar Harvesting Under Different Conditions
The HC1040EH48L solar power inverter has two independent MPPT channels. They support up to 8kW total PV input power. This inverter accepts a PV voltage of 500VDC maximum, with a 120VDC to 425VDC MPPT range and 18A input current per tracker in this solar power inverter configuration.
This design improves energy generation when solar panels have different:
- Roof orientations
- Tilt angles
- Shading conditions
Compared with single MPPT systems, dual MPPT architecture provides more PV system design options.
PV Input Comparison
| Feature | Traditional Solar Inverter | HC1040EH48L |
| MPPT Quantity | Usually 1 | 2 MPPT |
| PV Input Power | Limited matching flexibility | Up to 8kW |
| Panel Orientation | Less flexible | Multiple roof directions |
| Partial Shading Performance | Average | Improved |
| Solar Utilization | Standard | Optimized |
Homeowners harvest more daily energy, increasing solar power inverter payback and securing backup power.
IP65 Outdoor Enclosure & Thermal Engineering
The inverter has an IP65 ingress protection shell. It operates from -40°C to +60°C. A fan cooling system adjusts air circulation based on internal thermal demand.
This IP65 rating permits outdoor installation of this solar power inverter. It protects solar power inverter power electronics from dust, rain, and humidity without secondary protective cabinets.
The design saves indoor space, keeps operational noise below 55dB, and removes additional enclosure installation costs for the inverter.
Capabilities Regarding Grid Feed-In
When solar power generation exceeds the load demand and battery charging capacity, the excess electricity can flow back to the grid.
If local power regulations or utility agreements prohibit exporting power to the grid, the inverter supports external anti-backflow control.
This feature allows you to limit or completely block power feedback into the grid depending on your site configuration.
48V Battery Compatibility for Flexible Energy Storage
The HC1040EH48L supports multiple battery technologies.
Compatible batteries include:
- Lithium-ion batteries
- Lead-acid batteries
- Gel batteries
The system operates with:
- Nominal battery voltage: 48VDC
- Battery voltage range: 40-60VDC
- Maximum charge/discharge current: 100A
This makes it suitable for:
- Residential solar storage
- Backup energy systems
- Remote power applications
Pure Sine Wave Output for Sensitive Home Appliances
The HC1040EH48L solar power inverter delivers stable AC output with:
- Rated voltage: 220V/230V/240V
- Pure sine wave waveform
- THDu <2% under linear load
- Power factor >0.99 at rated power
It safely powers household equipment including:
- Refrigerators
- Air conditioners
- Computers
- Communication devices
- Lighting systems
The hybrid solar inverter supports adjustable power factor operation from: 0.8 leading to 0.8 lagging
This improves compatibility with different electrical loads.
High Capacity Scaling
By paralleling up to 15 units, the system can scale from a single unit up to a maximum total output capacity of 60kW.
Inverter models designated with a “P” suffix are equipped with parallel communication hardware. You can connect up to 15 units in parallel to scale total output power and battery capacity for larger residential or commercial installations. (Pm – Master; P – Slave).
Parallel-enabled units synchronize AC output frequency, voltage phase, and real-time load distribution via dedicated communication lines (RS485/CAN).
All connected units coordinate PV input power, charge/discharge cycles, and grid feed-in/backup modes seamlessly across the shared AC bus.
Fast Backup Switching and Generator Integration
For areas with unstable grid supply, the HC1040EH48L provides reliable backup performance.
Key functions include:
- ≤10ms transfer time
- Generator input support
- Grid and battery automatic switching
This allows continuous power supply for essential household loads.
Typical applications include:
- Rural homes
- Island energy systems
- Emergency backup power
- Off-grid solar solutions
Selling First Mode (Grid Export Priority)
Daytime: Solar power generation prioritizes powering local loads first. Any excess PV power generated beyond load demand is exported (sold) back to the utility grid.
Nighttime / Low Solar: When solar generation is unavailable, the system discharges the battery to supply connected loads. If battery energy is insufficient, the grid provides backup power
Integrated Protections & International Compliance
The HC1040EH48L IP65 solar power inverter integrates multiple protection functions.
Safety features include:
- Grid over/under voltage protection
- Grid over/under frequency protection
- Output short circuit protection
- Overload protection
- PV reverse polarity alarm
- Battery overcurrent protection
- Insulation resistance monitoring
- Residual current monitoring unit (RCMU)
- Ground fault protection
The design complies with international safety and EMC requirements:
- IEC 62109-1
- IEC 62109-2
- IEC/EN 61000 series
- EN 62920
Application
The HC1040EH48L is designed for various residential energy applications.
Home Solar Storage System
Ideal for:
- Residential rooftop solar
- Self-consumption optimization
- Peak electricity cost reduction
Off-Grid Energy System
Suitable for:
- Remote houses
- Rural areas
- Weak-grid locations
Backup Power System
Provides emergency electricity for:
- Essential appliances
- Security systems
- Communication equipment
Frequently Asked Questions
The Articles You may Like
- How C&I Energy Storage System Reduces Demand Charges
- Guide to Choosing the Best 12V Lithium Deep Cycle Battery
- LiFePO4 vs Lead Acid vs Gel Battery: Which Is Best for Solar Energy Storage
- Is your Battery BMS secure from hackers
- Best Solar Energy Storage System for Nighttime Power Supply
- Battery energy storage system – Wikipedia
