CMR10048 pv input 150v mppt solar charge controller 100a

MPPT Solar Charge Controller | 100A | 12V/24V/36V/ 48V(Auto) | PV Voltage: 150Vdc

SKU: CMR10048 Category:

GRANKIA CMR10048 pv input 150v mppt solar charge controller 100a was designed for large-scale projects, both mobile and stationary.

For even more power, the users can utilize a unique feature limited to this mppt solar charger and connect two 100A solar controllers in parallel for a total of 200 amps!

GRANKIA Electric CMR best pv 12v 24v 36v 48v mppt solar controller 30a-100a

CMR10048 mppt solar charge controller 100a can also conveniently self-diagnose itself in the event of an error and can be remotely controlled through the DC home app.

MPPT Solar Charge Controller 100A Feature

  • Compatible for PV systems in 12V, 24V, 36V, 48V
  • Fast MPP Tracking
  • Maximum power point tracking efficiency over 99.5%
  • PV INPUT 150V max Voc
  • Built-in lithium battery activation function
  • Support Sealed, GEL, Flooded, and Lithium-ion battery
  • Three stages charging optimizes battery performance
  • Die-cast aluminum design allows for efficient heat dissipation
  • Ability to output in parallel to power DC loads
  • Real-time energy statistic function
  • Very advanced monitoring app
  • Dual RS-485 communication interface allows for easy programming, control and remote monitoring

Setting UP Off-grid Solar System

MPPT Solar Charge Controller Setting UP Off-grid Solar System

MPPT Solar Regulator FAQ

  1. Does MPPT reduce voltage?

    MPPT controllers convert the higher voltage DC output from solar panels down to the lower voltage needed to charge batteries.

  2. Is MPPT solar regulator same as solar charger?

    The crux of the difference is: With a PWM controller, the current is drawn out of the panel at just above the battery voltage, whereas. With an MPPT solar regulator the current is drawn out of the panel at the panel “maximum power voltage”.

  3. Do I need a fuse between solar panel and MPPT charger?

    They are not necessary for the system to run properly, but we always recommend using fuses or circuit breakers for safety purposes.

The Articles You may Like

    Request Product Price

    * Required

    Model CMR10048
    MPPT Efficiency ≥99.5%
    System Voltage 12V/24V/36V/48V(Auto)
    Voltage Range 12V 9VDC-15VDC
    24V 18VDC-30VDC
    36V 27VDC-45VDC
    48V 36VDC-60VDC
    Li-ion Battery 8VDC-60VDC(Adjustable)
    Dimension 380x210x80mm
    Net Weight 5.0 Kgs
    Max. PV Input Voltage 150VDC
    Min. Vmpp Voltage Battery voltage +2V
    Start-up Charging Voltage Battery voltage +3V
    Low INPUT Voltage Protection Battery voltage +2V
    Over Voltage Protection 150VDC
    Recovery Voltage Protection 145VDC
    PV Rated Input Power 12V 1300W
    24V 2600W
    36V 3900W
    48V 5200W
    Li-ion Battery 1260W-5040W
    Load Voltage Same as battery voltage
    Load Current 50A
    Low Voltage Protection 10.5VDC, 11VDC restored (Settable)
    Setting Parameters Via PC software / APP / Self
    Battery Type Sealed(SEL), Gel(GEL), Flooded(FLD), Lithium-ion(Lit), User-defined(USE)
    Charging Mode MPPT (Maximum Power Point Tracking)
    Charging Current 100A
    Charging Method 3-stage: CC (Constant current) – CV (Constant voltage) – CF (Float charge)
    Temperature Compensation -3mV//2V
    Active Lithium Battery Function Optional
    Protection Function Input low/over voltage, input/output polarity reverse connection, short circuit, over temperature, battery shedding etc.
    Display HD LCD
    Communication Dual RJ45/RS485, WIFI/Bluetooth(optional)
    Protection Level IP21
    Relative Humidity 0 ~ 90% (Non-condensing)
    Altitude < 3000m
    Operating Temperature -20~+50
    Storage Temperature -40~+75
    Noise < 10dB