GRANKIA GIR3K-48 3000 watt pure sine wave rack mount dc ac inverter 48v. It is installation in telecommunications, data center, industrial, and commercial applications.
This rack mount dc ac inverter operates on a 48V DC input system. It delivers stable, high-quality 120V or 220V AC output. This makes it an ideal backup power solution for critical equipment that requires uninterrupted power supply.
GRANKIA GIR3K-48 rack mount dc ac inverter employs a microprocessor-based design that ensures absolutely accurate and stable frequency output. The inverter features a compact and lightweight construction while maintaining rugged, vehicle-rated durability suitable for demanding environments. The tightly regulated output voltage and frequency design ensures consistent power delivery to sensitive electronic equipment.
Rack Mount DC AC Inverter Features
Built-in Toroidal Transformer
Enhances conversion efficiency, reduces electrical noise, and ensures a stable, low-distortion sine wave output.
Continuous output
3000 W continuous power, with higher short-term surge capacity (9000W peak) for motor starts and compressor inrush.
48V DC input
Direct connection to common telecom and battery backup systems (lead-acid, AGM, gel, or Li-ion banks sized for 48V).
Rack-mount 3U form factor
Space-efficient 19″ rack compatibility for neat integration into standard cabinets.
Smart LCD + LED Display
Real-time monitoring of input/output voltage, load level, battery status, and operational mode.
Protections
Overload, short-circuit, over/under-voltage, over-temperature, reverse polarity, and ground-fault protection to protect both inverter and connected loads.
Technical Specifications (Representative)
- Model: GIR3K-48,
- Rated power: 3000W,
- AC Input: 110V/120V or 220V/230V/240V,
- AC Output: 110V/120V or 220V/230V/240V,
- Frequency: 50/60 Hz (auto-sensing or selectable),
- DC Input: 48VDC,
- Transfer time: <8 ms,
- Battery type: VRLA/AGM/LiFePO4,
- Wave Form: Pure Sine Wave,
- Communications: RS-232,
- Dimension: 483x420x132mm [3U].
Product Overview
Fault Code List
| Code | Description |
| E01 | Power amplifier over current |
| E02 | Output short circuit protection |
| E03 | Overload protection |
| E04 | Over temperature protection |
| E05 | Battery over voltage protection |
| E06 | Low battery voltage protection |
| E07 | Phase reverse protection |
| E08 | Low output voltage protection |
| E09 | Date of manufacture does not match |
| E10 | Battery power down, voltage drop |
Applications
- Telecom & Data Centers: Provides backup power for servers and networking equipment during blackouts.
- Medical & AV Systems: Delivers clean power to prevent equipment failure in life-critical or high-fidelity setups.
- Renewable Energy: Integrates effortlessly with 48V solar arrays or wind turbines for sustainable off-grid living.
- Industrial & Mobile: Powers tools and diagnostics in vehicles or remote sites with rugged, vehicle-rated durability.
Installation and Operation Notes
- Ensure battery bank is properly sized (Ah) and fused close to the battery terminals; use appropriate gauge cabling for 48V 3000W applications to limit voltage drop and heat.
- Provide adequate ventilation in rack enclosures; observe ambient temperature ratings to avoid thermal shutdown.
- Configure transfer settings when integrating with a generator or grid-tied source to prevent backfeeding.
- Regularly inspect connections, cooling paths, and firmware updates if applicable.
The Articles You may Like
- How does a 120 240 Split Phase Inverter Work
- Can I Charge Lithium iron Phosphate Battery 12V with a Normal Charger
- 10 Practical Steps for Critical Load Protection with Online UPS
- Choosing the Best Solar Battery Backup System for Your Home
- What Is 12V Lithium Iron Phosphate Battery and How Does It Work
- Uninterruptible power supply – Wikipedia